DK5020 Gear

Standard Features

• Contoured design complements tractor styling.
• Low profile design maximizes operator's visibility.
• Designed to be quickly and easily attached and detached.
• A built-in parking stand on the front end loader provides quick and easy connection.
• Mid-mount style frame for engine accessibility.
• A bucket level indicator is standard.
• Color complements KIOTI tractor.

Specifications

• Maximum Lift Height to Pivot Pin: 107.7 in. (2,735 mm)
• Clearance w/ Bucket Level: 96.3 in. (2,446 mm)
• Clearance w/ Bucket Dumped: 78.8 in. (2,001 mm)
• Reach at Maximum Height (45º): 22.7 in. (576 mm)
• Maximum Dump Angle: 46 deg.
• Reach w/ Bucket on Ground: 71.1 in. (1806 mm)
• Maximum Rollback Angle: 41 deg.
• Digging Depth Below Grade: 8.6 in. (218 mm)
• Overall Height in Carry Position: 54 in. (1371 mm)
• Bucket Depth (Inner Shell): 18.5 in. (470 mm)
• Bucket Height: 22 in. (560 mm)
• Bucket Length (Pivot Pin): 26 in. (660 mm)
• Lift Capacity to Full Height at Pivot Pins: 2,474 lb. (1,122 kg)
• Breakout Force at Pivot Pins: 3,895 lb. (1,767 kg)
• Bucket Rollback Force at Ground Line: 3,148 lb. (1,428 kg)
• Relief Valve Setting (Loader Control Valve): 2,774 psi (195 kg/cm²)
• Rated Flow (Tractor System): 9.62 gpm (36.4 L/min)
• Bucket Size(s) Available: 66 in. QA / 72 in. QA
• Bucket Capacity (Heaped): 66 in.: 14.5 cu. ft. / 72 in.: 16.0 cu. ft.
• Approximate Weight (With Bucket): 66 in.: 1,361 lb. (617 kg) / 72 in.: 1,389 lb. (630 kg)

Standard Features

• Subframe mounted.
• Self-contained hydraulics (not available for all applications).
• Factory assembled.
• Responsive two-lever hydraulic control with exceptional feathering characteristics.
• Anti-drop load-checks.
• Standard buckets: 12", 16", 18", 24" and 36" wide ditch and grave buckets.
• All buckets have replaceable teeth.
• Extra heavy-duty buckets.
• Entire backhoe except for subframe is quick-detached from tractor.

Specifications

• Digging Depth: 94.4 in. (2,400 mm)
• Reach (From center of Swing Pivot): 136.1 in. (3,460 mm)
• Loading Height (Bucket at 60 degrees): 80.3 in. (2,040 mm)
• Swing Arc: 180 deg.
• Transport Height (Maximum): 92.9 in. (2,360 mm)
• Transport Overhang: 50.4 in. (1,280 mm)
• Bucket Rotation: 180 deg.
• Stabilizer Spread (Down Position): 68.7 in. (1,745 mm)
• Stabilizer Spread (Up Position): 46.4 in. (1,180 mm)
• Shipping Weight (Less Bucket): 1,102 lb. (500 kg)
• Bucket Digging Force: 3,748 lb. (1,700 kg)
• Dipperstick Digging Force: 2,205 lb. (1,000 kg)
• Operating Pressure: 2,466 psi (170 bar)

Performance Features

• 72 inches Cutting Width
• Quick-Hitch Ready
• Gearbox Ratings of 65 HP
• Taller Sidebands for increased Cutting Volume and Efficiency
• Smooth-Top Deck for easy cleaning
• Custom Forged, 4" Wide Heat-Treated Blades

Construction Features

• Continuously Welded Deck
• Full-Length 10ga Strongbacks
• Reinforcing plates added to rear sidebands
• Double-Braced Lower Hitch Lugs
• Formed and Fully-Welded Tailwheel Mount
• Puncture-Proof Laminated Tailwheels

Safety Features

• PTO Shield
• Front Deflector
• Rear Metal Band
• Front Chains
• Rear Chains

Specifications

• Cutting Width: 72"
• Cutting Height: 2"-12"
• Cutting Capacity: 2"
• Hitch Type: Cat 1 Std & QH Ready; Cat 2 Std Compatible With Optional Bushings
• Deck Thickness: 10GA
• Sideband Thickness: 10GA
• Sideband Height: 11 1/2"
• Driveline: Cat 3
• Driveline Protection: 2-Plate Slip-clutch
• Gearbox: 65 HP
• Tractor PTO Speed: 540 RPM
• Minimum Tractor PTO HP: 30 HP
• Blade Holder: Oval
• Blades: 1/2" X 4" Uplift
• Blade Tip Speed: 14,963 fpm
• Tires: 15 1/2" Laminated
• Deflector Type: Rubber/Metal/Chains
• Approximate Weight: 840 lb.
• Gearbox Warranty: 10 Years

Capability

• Hydraulic implement flow rate 8.5gpm to 14.9gpm - Standard motor
• Hydraulic implement flow rate 15gpm to 20gpm - High capacity motor (Special Order Only)
• Hydraulic rear remotes* or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
• We do not recommend rear remote plumbing as some tractors may lose loader priority
• NOT COMPATIBLE WITH DIVERTER VALVES
• Minimum dry tractor weight of 3000 lbs
• Minimum tractor width of 55 inches
• Certified roll over protection system
• For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

Details

• The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
• Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
• Multi-position adjustment rail for added versatility and an extra foot of vertical extension
• The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
• Rear rubber skirt and skid shoes for a smoother cutting process
• The Lane Shark LS4 weighs just under 450 lbs.
• When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
• NOT COMPATIBLE WITH SKID STEERS

Specifications

• Dimensions (L x W x H): 30" x 8" x 24"
• Weight: 68 lbs
• Max Lifting capacity: 880 lbs

Specifications

• Product Family: Standard Duty Auger Drives
• Product: 9211
• Description: 1500 Auger Drive w/ 2" Hex Shaft
• Flow Range (GPM): 5 - 13
• Max Pressure (PSI): 2973
• Max Torque @ 3500 PSI (FT LB): 1103
• Speed @ Max Torque (RPM): 98
• Weight (lbs): 101 lbs
• Notes: 4 - 16" Recommended Bit Size

Specifications

Specifications

• Product Family: Offset Flail Mowers
• Product: FRF-145
• Description: FRF-145 Offset Flail Mower
• Offset: Offsets to the right
• Degree of Tilt: 90 degrees up and 65 degrees down
• HP Required: 30-45 hp
• Working Width: 55"
• # of Hammers: 24
• Hammer Size: 3.4" x 1.7"
• Side Transmission: 3 Belts
• Roller Thickness or Diameter: 4.7"
• Rotor Thickness or Diameter: 4.2"
• Weight (lbs): 672 lbs
• PTO Drive Shaft: Series 4

Specifications

• RPM: 540
• HP Required: 35 minimum PTO (gear drive transmission)
• Working Width: 144 in.
• Overall Width: 151 in.
• Overall Length: 158 in.
• 759 lbs

Description

Description

Description

Includes:

• Car Hauler Trailer
• 6'x10"x18'
• 2' Dove
• 2" Ball - 8K Coupler
• 4.5' Slide-in Ramps
• 5" C Chanel Tongue
• Treated Lumber
• D-Ring Tie Down Hooks
• Radial Tires
• 2 - 3,500 lb Spring Axles (1 Elec FSA Brakes)
• Lights LED (w/Cold Weather Harness)
• Set Back Jack
• Stake Pockets
• Electric Brakes
• Brake Away Kit
• Black Paint (w/Primer)

• Full WR Long Third Function and valve for continuous hydraulic flow
• An affordable, fully custom solution for getting your tractor Lane Shark and grapple ready
• Includes a WR Long Third Function, Lane Shark Continuous Flow Valve, Lane Shark switch box, prefabricated whips with quick connect fittings, and a bulkhead mount fully customized to fit your specific tractor make, model, and loader so you can exchange your attachments in one simple step
• Easy install in less than 2 hours
• American made using American parts and labor
• Lane Shark C-Flow and WR Long third function valves include a 1 year limited warranty. Electrical components include a 90 day limited warranty. Hoses include a 30 day limited warranty.
• Still unsure what kind of hydraulic kit you may need for your Lane Shark? Visit our FAQ Support Page or contact us to find the best solution to get you up and cutting
• Compatible with a wide variety of tractor makes, models, and loaders. Please contact us or your local dealer to be paired with your exact, custom fitted kit

• 2 Pads per set
• Compatible with 2465, 2475, and 2485 backhoes