Engineered for seamless compatibility, the KIOTI KL7340 front end loader offers efficient performance effortlessly controlled through a single joystick. The built-in parking stand and quick-attach system ensure swift loader detachment and reattachment. Robust hydraulics enable smooth lifting and lowering, while the single-lever control with float function grants ultimate precision. Maintain clear visibility of your load with the handy bucket level indicator.

Models	KL7340
Compatibility	Fits the RX6640/7340 models
Lift Height Max Pivot Pin	127.10 in (3,229 mm)
Clearance Dumped	93.58 in (2,377 mm)
Dump Angle Max	55 °
Reach at Ground	83.62 in (2,124 mm)
Rollback Angle Max	51 °
Digging Depth	6.22 in (158 mm)
Height Max in Carry Position	69.37 in (1,762 mm)
Bucket Depth	24.09 in (612 mm)
Height	24.40 in (620 mm)
Depth	24.09 in (612 mm)
Length	81.89 in (2,080 mm)
Reach at Max Height	17.40 in (442 mm)

Add To Configuration

Bush Hog BH217-2 Single-Spindle Rotary Cutter

Price: $5,499.00

Building on the success of the original BH210 Series, the new, updated BH210-2 Series Rotary Cutters combine the legacy and reputation of Bush Hog®‘s Single-Spindles with new, innovative design updates. These updated cutters now have full-length strongbacks designed to reinforce the entire length of the cutter, front to back, especially enhancing the rear half of the cutter and tailwheel structure. Reinforcement plates have been added to the bottom of the rear sidebands, providing extra strength in this critical area when backing into vegetation. Tall grass, pesky weeds, and small brush are no match for these authentic Bush Hog® built cutters. The BH210-2 Series Rotary Cutters are “Made in America” and designed to deliver superior performance in tough conditions, day after day, and year after year. Remember, “If it doesn’t say Bush Hog®, it just won’t cut it.”

Performance Features

84" Cutting Width
Quick-Hitch Ready
130 HP Gearbox Rating
Taller Sidebands For Increased Cutting Efficiency
Smooth-Top Deck for easy cleaning
Custom Forged, Heat-Treated Blades

Construction Features

Continuously Welded Deck
Full-Length 10ga Strongbacks
Reinforcing plates added to rear sidebands
Double-Braced Lower Hitch Lugs
Formed and Fully-Welded Tailwheel Mount
Puncture-Proof Laminated Tailwheels

Safety Features

PTO Shield
Front Deflector
Rear Metal Band
Front Chains
Rear Chains

Specifications

Cutting Width: 84"
Cutting Height: 2"-12"
Cutting Capacity: 2"
Hitch Type: Cat 1 or 2 Std & QH Ready
Deck Thickness: 10 Ga
Sideband Thickness: 10 Ga
Sideband Height: 11 1/2"
Driveline: CAT 4
Driveline Protection: 2-Plate Slip-Clutch
Gearbox: 130 HP
Tractor PTO Speed: 540 rpm
Minimum Tractor PTO HP: 50 HP
Blade Holder: Oval
Blades: 1/2" X 4" Uplift
Blade Tip Speed: 14,963 fpm
Tires: 15 1/2" Laminated
Deflector Type: Rubber/Metal/Chains
Approximate Weight: 1,075 lb.
Gearbox Warranty: 10 years

NOTES:

Unit shown equipped with certain selections and options.

Add To Configuration

IronCraft 84" Heavy-Duty Cutter

Price: $4,948.00

The 1607 Heavy Duty Cutter is designed for heavy-duty applications such as weeds, grass, and brush up to 3" diameter. Engineered to work with 55 to 100 hp tractors, and with an 84" working width, this cutter uses a single spindle with two free-swinging blades, which reduce the shock of impact when a stationary object is contacted. A slip clutch protects the gearbox and driveline from damage. Standard equipment includes driveline shields and clutch shields. Front and rear chain and rubber discharge shields are available.

Specifications

PTO HP: 55 - 100 HP
Width: 84"
Weight: 1375 lbs
Cutting Capacity: 3"
Deck Thickness: 7 Gauge
Side Bands: 8"
PTO Drive Shaft: Series 5
Stump Jumper: 5/8"
Gear Box: 100 HP
Wheel: Laminated
Hub: Greaseable
Hitch: Cat. I & II
Quick Hitch Compatible: Yes, Cat. II
Discharge Shields: Available

Add To Configuration

Lane Shark LS-4 Brush Cutter

Price: $4,700.00

Capability

Hydraulic implement flow rate 8.5gpm to 14.9gpm - Standard motor
Hydraulic implement flow rate 15gpm to 20gpm - High capacity motor (Special Order Only)
Hydraulic rear remotes* or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
We do not recommend rear remote plumbing as some tractors may lose loader priority
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight of 3000 lbs
Minimum tractor width of 55 inches
Certified roll over protection system
For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

Details

The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
Multi-position adjustment rail for added versatility and an extra foot of vertical extension
The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
Rear rubber skirt and skid shoes for a smoother cutting process
The Lane Shark LS4 weighs just under 450 lbs.
When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
NOT COMPATIBLE WITH SKID STEERS

*May require the C-Flow 3rd Function Kit

Add To Configuration

Bush Hog 2208 Multi-Spindle Rotary Cutter (Pull-Type)

Price: $9,899.00

The new 2208 Multi-Spindle Rotary Cutter is designed for general purpose cutting of fields, crop residue, and light brush up to 2” in diameter. Cutting efficiency is increased by the 8’3” cutting width and 11 ¾” sideband height allowing a greater volume of material within the cutting chamber. Then, higher blade tip speeds shred though tough vegetation for a clean cut of material with excellent distribution. The pull-type model comes equipped with an ASAE CAT 4 CV driveline, rubber cushioned axles, and 21” laminated tires. And with a tongue weight of only 880 lb., the 2208 pull-type is easier on tractor drawbars, effectively powered by tractors with only 35HP. An optional heavy-duty hydraulic cylinder allows for on-the-go cutting height adjustment, while an easy to adjust tension rod allows for leveling the cutter from front to back. All models feature durable, rubber discs within the cross-shafts between gearboxes for dependable protection from unexpected shock loads. The 2208 carries on our tradition of making tough, dependable, performance-driven cutters, and is one more example of why “If it doesn’t say Bush Hog®, it just won’t cut it.”