NS6010 Gear Cab

Specifications

• PTO HP: 40 - 45 HP
• Width: 72"
• Weight: 726 lbs
• Cutting Capacity: 1.5"
• Deck Thickness: 11 Gauge
• Side Bands: 7"
• PTO Drive Shaft: Series 4
• Stump Jumper: Pan
• Gear Box: 55 HP
• Wheel: Laminated
• Hub: Greaseable
• Hitch: Cat. I
• Quick Hitch Compatible: Yes
• Gearbox Warranty: 5 Year Limited
• Discharge Shields: Available

Specifications

• Overall Width: 78"
• Tilling Width: 73"
• Tractor HP Range: 25 HP - 50 HP
• 3-Point Hitch Type: Cat I
• Number of Flanges on Rotor: 9
• Number of Tines per Flange: 6
• Number of Tines: 54
• Weight (w/o PTO): 684 lbs
• PTO Input Speed: 540 RPM
• Max Working Depth: 7"
• Rotor Tube Diameter: 3"
• Rotor Swing Diameter: 17"

Specifications

• Horsepower: 30 - 70 HP
• Working Width: 72"
• Moldboard Height: 17"
• Overall Depth: 22"
• Weight: 530 lbs
• Number of Shanks: 5
• A-Frame Material: 1/2"
• Cutting Edges: 6"
• Quick Hitch Compatible: Yes
• Hitch: Cat I & II

Specifications

• Horsepower: 30 - 70 HP
• Working Width: 84"
• Moldboard Height: 17"
• Overall Depth: 22"
• Weight: 586 lbs
• Number of Shanks: 6
• A-Frame Material: 1/2"
• Cutting Edges: 6"
• Quick Hitch Compatible: Yes
• Hitch: Cat I & II

Specifications

• Overall Width: 89"
• Mowing Width: 48"
• Tractor HP Range: 40 - 50 HP
• Cutting Height: 1" - 4"
• 3-Point Hitch Type: Cat. I
• Number of Blades: 3
• PTO Input speed: 540 RPM
• Deck Thickness: 7 Gauge
• PTO Shaft Type: Series 4
• Weight (w/o PTO): 662 lbs
• Belts: 2
• Front Roller: Standard

• Tractor HP Requirement: 35 - 55 HP
• Working Width: 72"
• Overall Width: 77 5/8"
• Unit Weight: 545 lbs
• Number of Scarified shanks: 5
• A-Frame Material: 3/8"
• Overall Length: 52 7/8"
• Overall Height: 33 3/4"
• Side Panel Thickness: 3/16"
• Side Panel Height: 15 11/16"
• Side Panel Length: 46 3/8"
• Scarifier Support Tube Construction: 4" x 4" x 1/4"
• Rear Beam Construction: 3" x 3" x 3/16"
• Skid Show Dimensions: Replaceable 3 /16" x 2 3/4" x 47 3/8"
• Scarifier Shank Construction: 3 Position heat treated shank with dimpled-on hardened tips
• Shank Adjustment: (@ Grade Level): 1 1/2"; (Below Grade Level): 3"
• Lower Draft Link Attachment: Clevis Type
• Hitch Type: Cat I
• Quick Hitch Compatible: Yes

Specifications

• Horsepower: 50 - 75 HP
• Working Width: 84"
• Moldboard Height: 17"
• Weight: 469 lbs
• Angle Adjustment: Five positions; Forward and reverse
• Tilt Adjustment: Three Positions
• Offset adjustment: Ratchet Jack
• A-Frame Material: 3/8"
• Cutting Edges: 6"
• Quick Hitch Compatible: Yes
• Hitch: Cat. I & II

Specifications

• Features: Heat treated forks; Euro style and John Deere mounts are available; Steps on both sides of frame
• Forks Length: 48"
• Lift Capacity: 4,000 lbs

Specifications

• Features: Euro Style and John Deere mounts are available
• Lift Capacity: 3,500 lbs
• Number of Spears: 1

Specifications

• Description: Standard duty utility sized auger.
• Tractor Category: Cat 1 & 2
• Gearbox: 3:1 Ratio, 2" Output shaft
• Driveline: Yoke TS 6-Spline PTO
• Auger Diameter: 9"
• Boom: 2 7/8 O.D. Tubing
• A-Frame: 2 7/8 O.D. Tubing
• Shipping weight: 265 lbs
• Warranty: 2 Year Limmited
• Safety Shields: On driveline, Gearbox "U" joint, and Gearbox output shaft
• Available Colors: Red

Specifications

• Size: 66"
• HP Required: Up to 45 HP
• Cylinder: Dual 2" x 8"

Specifications

• Overall Width: 69"
• Mowing Width: 63"
• Tractor HP Range: 35 - 70 HP
• 3-Point Hitch Type: Cat. I
• Hydraulic Offset: 12"
• Number of Hammers: 20
• Weight (w/o PTO): 908 lbs
• Belts: 4

Key Features

• Heavy-Duty Frame and Gearbox Stand Construction
• Heavy Duty Pull-Type Axle with 21" Laminated Tires
• Self-Leveling Pull-Type with Reinforced Axles and Tongue
• Durable rubber discs protect Cross Shafts from harsh impacts and loads

Performance Features

• Reliable Bush Hog® Performance In An Economical Pasture Mower
• 8'3" Cutting Width
• Durable Rubber Discs in Cross Shafts from Transfer Box To Cutting Gearboxes
• Front Single or Double Row Chains
• Rear Metal Band, Single Row Chains, or Double Row Chains
• 7 Gauge Oval Blade Pans
• Shock Absorbing Axles
• EZ-Clean Sloped Deck that sheds water
• High Blade Tip Speeds

Features and Benefits

• Five wheels per wing: Rake up to 22 ft (6.9 m) in each pass with five wheels on each wing.
• Adjustable rake without tools: No tool adjustment because raking width and angle can be changed easily without tools to increase or decrease windrow size.
• Greaseable tapered roller bearings: Keep your Vermeer hay rake running smooth with greaseable tapered roller bearings on the rake wheels and transport wheels.
• High-clearance frame: High-clearance frame allows for heavy hay crops to pass through easily for windrow formation.

Dimensions and Weights

• Raking width minimum: 19 ft (5.8 m)
• Raking width maximum: 22.6 ft (6.9 m)
• Windrow width minimum: 19 in (48.3 cm)
• Windrow width maximum: 82 in (208.3 cm)
• Transport Width: 10 ft (3 m)
• Transport Length: 20.2 ft (6.2 m)
• Transport Height: 9.4 ft (2.9 m)
• Total Weight: 1520 lbs (689.5 kg)
• Tongue Weight: 300 lbs (136.1 kg)
• Transport tire size: ST205/75D15
• Flotation: Rubber torsion on toolbar

Raking Components

• Number of Rake Wheels: 10
• Rake wheel diameter: 55 in (139.7 cm)
• Teeth per wheel: 40
• Tooth diameter: .3 in (.8 cm)
• Rake wheel wind discs: Optional
• Single-side raking: Standard left- or right-side capable

Tractor Requirements

• PTO horsepower minimum: 30 hp (22.4 kw)
• Hydraulic Type: 1 double-acting
• Hydraulic Pressure: 1500 psi (103.4 bar)
• Hydraulic flow rate: 5 gpm (18.9 L/min)

Features

• Safety Chain: Optional
• Center splitter: Optional

• Camless pickup: The Vermeer camless pickup comes standard on the 504R Classic baler. Built with fewer moving parts, this camless pickup allows you to get the job done when you have time to put up hay and minimize parts cost when it is time for routine maintenance.
• Atlas control system: The Atlas™ control system delivers robust performance in a simple and intuitive package. A 4.3-in (10.9-cm) color touchscreen displays everything you need to bale and allows operators to enter field statistics to track bales per hour and average bale size. Optional features include ability to see bale shape on the display as well as real-time moisture readings.
• Low recommended PTO horsepower: Tractors just don't run balers. That is why we designed a baler to fit your tractor. With a low recommended PTO horsepower of 50 hp (37.3 kW), the 504R Classic will run with most part-time operators' tractors.
• 3-year pickup warranty: Operators can rest assured with a 3-year pickup warranty covering internal components and parts and labor on the 504R Classic baler. Does not include teeth or hardware for teeth.
• Optional netwrap system: Using netwrap helps to reduce hay loss compared to twine and keep the shape and structure of your bales during storage.

Bale Size

• Bale Diameter: 36 in - 60 in (91.4 cm - 152.4 cm)
• Bale Width: 47 in (119.4 cm)
• Maximum bale weight: 1000 lbs (453.6 kg)

Dimensions and Weights

• Length standard: 156 in (396.2 cm)
• Length with net: 173 in (439.4 cm)
• Length with ramp: 169 in (429.3 cm)
• Height: 107 in (271.8 cm)
• Width with standard tires: 100 in (254 cm)
• Tires: Standard - 11L-15; Optional - 31 x 13.5-5
• Weight fully optioned: 5260 lbs (2385.9 kg)

Bale Forming Chamber

• Drive Roller Size: 4.78 in (12.1 cm)
• Idler roller size: 3.5 in (8.9 cm)
• Start Roller Size: 4.5 in (11.4 cm)
• Belt Type: Standard mini rough top
• Number of Belts: 5
• Width of Belt: 6.8 in (17.3 cm)
• Length of belt (long): 465.5 in (1182.4 cm)
• Length of belt (short): 455.5 in (1157 cm)
• Type of Lace: Alligator rivet

Drive System

• Driveline: 540 rpm, standard lube, radial pin clutch
• Torque protection pickup: Radial pin clutch
• Roller chains: Single 60
• Bearing and Sprocket Configuration: Round drive shafts and bearings

Tractor Requirements

• PTO horsepower minimum: 40 hp (29.8 kw)
• PTO horsepower recommended: 50 hp (37.3 kw)

Pickup

• Pickup type: Camless wide
• Width tooth to tooth: 60 in (152.4 cm)
• Tooth Bars: 4
• Number of Teeth: (48) double steel coil
• Teeth spacing: 2.83 in (7.2 cm)
• Stripper bands: Steel
• Flotation: Optional gauge wheels 4.8-16 HD semi-pneumatic with spring assist
• Pickup Lift: Manual standard, hydraulic optional
• 3-year pickup warranty: Standard

Control System

• Control system type: Atlas™ control system
• Display: 4.3 in (10.9 cm) color touch screen
• Field Statistics: 10 fields
• Bale shape indicators: Optional
• Moisture: Optional - up to 27%
• Bales per hour: Standard

Density

• Bale density adjustments: Standard manual through hydraulic relief valve
• Density readings: Optional physical gauge

Bale Tie System

• Twine system: Optional
• Netwrap system: Optional
• Net tension control: via mechanical adjustment
• Extra roll storage: Standard

Features

• Bale ramp: Optional spring-loaded
• Fire extinguisher, safety chain: Optional